Semi-Automatic 18650 Lithium Battery Spot Welder Multi-Pulse
Welding Power Supply
Application scope of the product
Power lithium-ion battery module, 3C lithium-ion battery pack,
nickel-metal hydride battery pack, hardware small parts, electronic
and electrical
parts, wire terminals, stainless steel parts, metal jewelry, copper
products, aluminum products, etc. At the same time, it is also
suitable for product
maintenance proofing and other work.
Equipment introduction
1) Using air source solenoid valve signal control
2) Configurable semi linkage function
3) The height of the equipment welding head can be adjusted up and
down, and the minimum height of the battery should not be less than
50MM, and the maximum height should not exceed 220MM (the height of
the higher version is 300MM). All within this range can be welded.
4) The detachable design of the welding head clamp can be used for
both convex spot welding and pointed needle spot welding.
5) High quality tempered glass is used to protect the desktop from
wear and tear, making it easy to move during welding.
6) Independently developed precision welding machine head, with
precise and adjustable welding pressure and buffer adjustment
pressure mechanism, can effectively reduce damage to battery cells
during welding.
7) The power supply can store welding parameters internally, with a
total of 10 sets of welding parameters. It can weld nickel sheets
of different thicknesses and can be easily accessed, making it
simple and convenient.
8) By adopting dual stage multi pulse regulation, the welding
output energy waveform can be improved, the welding ability can be
enhanced, and the welding points can be firm and beautiful. Low
power failure rate and high spot welding efficiency
9) The power supply is equipped with automatic monitoring and
tracking compensation of grid voltage, which can effectively reduce
adverse phenomena such as virtual welding and achieve high-quality
welding
10) Using digital LED display, the interface is simple and easy to
adjust. The various parameters of the device are more intuitive,
easy to learn and operate.
11) The welding power supply adopts a design of post discharge
electrodes and can be assembled on automated welding equipment.
12) Adopting industrial grade circuit design, the circuit is safe,
reliable, and has a low failure rate.
13) The appearance of the equipment is exquisite, with superior
structural design, compact and reasonable structure, small size,
and high power.
14) The whole machine adopts high-quality components
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Function Introduction
1. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent
the damage caused to the desktop during welding. At the same time,
it can increase the fluency of welding and increase the welding
efficiency.
2. Cylinder drive
The air source interface is connected to the pressure regulator to
adjust the air source pressure and filter the water. The gas is
sent to the solenoid valve, which controls the gas drive cylinder
and drives the welding head.
3. Pneumatic precision welding head
Horizontal welding structure, double linear guide design, left and
right pressure can be adjusted separately. Built-in pressure
sensor, precise control to apply stable pressure.
Welding samples
FAQ
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Service process
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
