5000A Power Supply Battery Tab Spot Welding Machine Pneumatic
Battery Spot Welder
Application scope of the product
Power lithium-ion battery module welding, 3C lithium-ion battery
pack welding, Ni-MH battery pack welding, hardware welding,
electronic and
electrical parts welding, wire terminal welding, stainless steel
parts welding, metal jewelry welding, copper products welding,
aluminum products
welding. It is also suitable for product maintenance and proofing.
Equipment introduction
● CHEEBO lithium battery spot welding machine adopts self-developed
precision welding head and precise pressure adjustment and control.
● CBLQ-5A battery nickel welding machine does not need welding
transformer, small size, light weight, beautiful.
● It can be used for bump spot welding and needle spot welding.
● 18650 Battery spot welder has three control modes: constant
current, constant voltage, constant current and constant voltage
combination mode.
● Built-in pre-inspection function, which can be used to judge
whether the workpiece is electrified before welding.
● The welding current of lithium battery spot welder can be switched
quickly and effectively by transistor without transformer.
● The welding power supply is controlled by switch mode, which can
realize small and efficient welding and high output.
● The welding current of the power source rises quickly, and the
high quality welding can be realized in a short time.
● The spot welding machine of lithium ion battery group increases
the function of connection point and effectively improves the
production efficiency.
●Independent research and development of precision welding head,
precise pressure adjustment control.
● Controlled by microcomputer technology, it can dynamically monitor
the waveforms of welding current, voltage, power and resistance in
real time.
● 5.7inch HD LED display screen, convenient and intuitive adjustment
of equipment parameters, and can store multiple programs in
advance.
● There are three kinds of welding methods: constant voltage,
constant current and constant voltage current combination.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Function Introduction
1. Adjusting mechanism of welding head
The welding head can be adjusted up and down to increase the
distance between the desktop and the welding head. Can weld a
variety of different heights, different types of cells.
2. Transistor power supply
The welding current rises very fast, achieving high quality welding
in a short time. The waveform of welding current, voltage and
resistance is dynamically and real-time detected. Built-in
pre-check function, welding work can be judged before welding
power.
3. Thick cable
Thick pure copper cable, low resistance wire, large carrying
capacity, thick enough, welding no heat current no loss transmitted
to the welding head, to ensure welding current.
FAQ
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
