Battery Tab Spot Welding Transistor bipolar bench battery spot
welding machine
Equipment introduction
● Adopting self-developed precision welding head, the pressure is
precisely adjusted and controlled.
● Bipolar output eliminates the welding polarity effect and makes
the energy on both sides of the welding electrode consistent, while
effectively eliminating the welding sticky pin phenomenon.
● Welding voltage/current during bipolar welding flows from the
left pin to the right pin for the first weld, and welding energy
flows from the right pin to the left pin for the second weld.
● Both bump spot welding and tip spot welding can be applied.
● With three control modes: constant current, constant voltage, and
a combination of constant current and constant voltage.
● Built-in pre-test function can be used to determine whether the
workpiece is energized before welding.
● The welding current of lithium battery spot welder can be
switched quickly and efficiently by transistor without transformer.
● No welding transformer required, small size, light weight and
aesthetics.
● The welding power supply is controlled by a switching method for
small and efficient welds with high output.
● The power supply welding current rises quickly for high quality
welding in a short time.
● Added continuous spot welding function, effectively improving
production efficiency.
● Independently developed precision welding head with precise
pressure adjustment control.
● Microcomputer technology control, dynamic real-time monitoring of
waveform of welding current, voltage, power and resistance.
● 5.7" HD LED display, easy and intuitive adjustment of equipment
parameters, multiple programs can be stored in advance.
Applicable scope
Power lithium-ion battery module assembly and welding, 3C
lithium-ion battery pack welding and assembly, nickel-metal hydride
battery pack spot
welding, hardware welding, electrical and electronic parts welding,
wire terminal welding, stainless steel welding, metal jewelry
welding, copper
products welding, aluminum products welding.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Bipolar transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Welding case
Function Introduction
1. Bipolar transistor welding power supply
Bipolar welding, welding voltage/current, the first welding from
the left welding needle to the right welding needle, the second
welding welding energy from the right welding needle to the left
welding needle. Welding energy output the most stable power supply,
real-time display of welding voltage and current waveform, current
rise fast, can achieve high quality welding in a short time.
2.Welding head adjusting mechanism
The welded joint can be adjusted up and down to increase the
distance between the desktop and the welded joint.
Can weld all kinds of different heights and different types of
cells.
3.Pure copper cable
Coarse pure copper cable, low wire resistance, large bearing
capacity, thick enough, no thermal current lossless transfer to the
welding head to ensure the welding current.
FAQ
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
