10000A Transistor Power Supply Battery Tab Spot Welding Machine
Equipment introduction
● Adopting the self-developed precision welding head, the pressure
adjustment control is accurate.
● The bipolar output eliminates the welding polarity effect and
makes the energy on both sides of the welding rod consistent, which
can effectively eliminate the sticky needle phenomenon.
● In bipolar welding, the welding voltage/current flows from the
left pin to the right pin for the first weld and the welding energy
flows from the right pin to the left pin for the second weld.
● Can be used for both bump and tip welding.
● Three types of control are available: constant current, constant
voltage, and a combination of constant current and constant
voltage.
● Built in pre-test function can be used to determine if the work
piece is energised before welding.
● The welding current of the lithium battery spot welder is
switched quickly and efficiently by transistors, no transformer is
required.
● No need for welding transformer, small size, light weight and
beautiful.
● The welding power supply is controlled by a switching method,
allowing for small, efficient welds and high throughput.
● The power supply has a fast rise in welding current, enabling
high quality welding in a short time.
● Added continuous spot welding function to effectively improve
production efficiency.
● Independently developed precision welding head with precise
pressure adjustment control.
● Controlled by microcomputer technology, it can monitor the
welding current, voltage, power and resistance waveform dynamically
in real time.
● 5.7" HD LED display for easy and intuitive adjustment of
equipment parameters, and multiple programs can be stored in
advance.
● Thickened explosion-proof glass protects the table from wear and
tear when welding, ensuring smooth welding.
● Welding is done by vertical spot welding with manual control of
press-in depth.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Bipolar transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Welding case
Function Introduction
1.Explosion-proof tempered glass
High quality tempered glass protects the table top from abrasion
during welding. Ensure smooth and smooth welding process.
2. Bipolar transistor welding power supply
Bipolar welding, welding voltage/current, the first welding from
the left welding needle to the right welding needle, the second
welding welding energy from the right welding needle to the left
welding needle. Welding energy output the most stable power supply,
real-time display of welding voltage and current waveform, current
rise fast, can achieve high quality welding in a short time.
3.Cylinder drive
The air source interface is connected to the pressure regulator to
adjust the air source pressure and filter the water. The gas is
sent to the solenoid valve, which controls the gas drive cylinder
and drives the welding head.
FAQ
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
