Welding Power Supply Cylindrical Lithium Battery Pack Spot Welding
Machine
Equipment introduction
● The welding current of the power supply rises quickly and
achieves high quality welding in a short time.
● There are three welding modes: constant voltage, constant current
and constant voltage current
● The output current has various polarity switching functions,
which can effectively eliminate the polarity effect in the welding
process.
● Microcomputer technology control, real-time monitoring of welding
voltage, current, resistance waveform.
● The welding current can be controlled efficiently and quickly by
switching between transistors without the need for a transformer
● No need for welding transformer, small, lightweight, beautiful
● Built-in pre-check function, can be used to judge the work piece
before welding power
● 5.7 inch HD LED display, device parameter adjustment is
convenient and intuitive, multiple programs can be pre-stored
● Energy saving and environmental protection, stable and efficient,
low power consumption of equipment.
Technical specification
| Model | MTA-5000A | MTA-8000A | MTA-10000A | MTB-5000A |
| Type | Normal form | Normal form | Normal form | Bipolar switching type |
| Maximum power consumption | 330W | 300W | 550W | 550W |
| Maximum welding current | 3000A | 6000A | 10000A | 5000A |
| Maximum voltage | 30V(customizable) |
| Control mode | 1. Constant current control 2. Constant voltage control 3. Current
and voltage combination mode |
| Time setting | Preloading time:0000-9999MS |
| Rise time:0.00-9.99MS |
| Welding 1 Welding 2 Set time:0.00-9.99MS |
| Cooling time:0.00-9.99MS |
| Slow down time:0.00-9.99MS |
| Holding time:0000-9999MS |
| Current setting range | 100-999A | 100-999A | 100-999A | 100-999A |
| 0.25-3.0KA | 0.50-6.0KA | 1.00-9.99KA | 0.50-5.00KA |
| Voltage setting range | 0.00-9.99V |
| Current upper and lower limits set | 000-999A 0.00-9.99KA |
| Voltage upper and lower limits set | 0.00-9.99V |
| Monitoring display | Power on 1.2(current and voltage RMS/voltage RMS),
Power 1.2(peak current/peak voltage),
Power 1.2(Power RMS/impedance RMS Current voltage Power positive
reactance waveform specification label) |
| Input power supply | Single-phase 200-240VAC50/60HZ |
Operating interface
The waveform of welding current, voltage, power and resistance is
dynamically detected, and the welding energy is displayed in real
time.
