Foot Switch Lithium Battery Spot Welder Semi Automatic Manual
Operation Welding
Equipment introduction
● CHEEBO lithium battery spot welding machine adopts self-developed
precision welding head, with accurate pressure regulation and
control.
● Transistor welding power supply, no welding transformer is
required inside. Energy can be switched quickly and efficiently
through transistors. The welding current increases rapidly, and
high quality welding is achieved in a short time.
● 18650 battery spot welding machine has three control methods:
constant current, constant pressure, constant current, constant
pressure combination.
● Built-in pre-detection function, can judge the workpiece before
welding.
● The welding power supply is controlled by switching mode, which
can realize small and efficient high output welding.
● Lithium-ion battery spot welding machine adds continuous spot
welding function, which can effectively improve production
efficiency.
● Microcomputer technology control, real-time monitoring of welding
voltage, current, resistance waveform.
● 5.7-inch HD LED display, convenient and intuitive device
parameter adjustment, and can store multiple programs in advance.
● With a thick explosion-proof glass, protect the desktop in the
welding process is not easy to wear, to ensure smooth welding.
● The vertical spot welding method is used for welding, and the
pressing depth is manually controlled.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding
|
Function Introduction
1. Precision resistance welding head
Horizontal welding structure, double linear guide design left and
right pressure can be adjusted according to the welding thickness.
Built-in pressure sensor, precise control to apply stable pressure.
2. Transistor welding power supply
Welding energy output is the most stable power supply, real-time
display of welding voltage and current waveform, current rising
fast, can achieve high quality welding in a short time.
2. Thick cable
Thick pure copper cable, low resistance wire, large carrying
capacity, thick enough, welding no heat current no loss transmitted
to the welding head, to ensure welding current.
Application case
1. Energy storage battery pack 2. Electric bicycle battery pack 3.
Power tool battery pack
FAQ
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Service process
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
