21650 Cylindrical Battery Cell Vertical Fully Automatic Lithium
Battery Sticker Machine
Equipment introduction
● This sticker machine is controlled by a PLC to complete the
function of applying highland barley insulation paper to the
positive electrode of 18650/21700/21650 finished battery cells,
such as stepper motors and cylinders.
● Approximately 4000 finished cylindrical cells can be completed
per hour.
● Adopting a 7-inch high-definition touch screen, real-time
monitoring of machine operation status.
● Using a cylinder driven cutting knife for stamping, four battery
cells are punched at once, and the slices are made of high-speed
steel material, with high wear resistance, good product quality,
and high production efficiency.
● Sticker and stamping are stable, with high consistency in
placement and low defect rate.
● Fault information reminder function, fault sound and light alarm,
can quickly diagnose faults.
● With the function of clearing tailings, it can clear tailings
with one click.
● Compatible materials: highland barley paper, express paper,
Oblaat, RET protective sticker, etc.
● The mechanical structure design is simple and generous, and the
system performance is stable.
Technical specification
| Production efficiency | 60-70PPM | Air source specification | 1/CFM |
| Applicable battery specifications | 18650/21700/21650 | Pass rate | ≥95% |
| Sticker efficiency | ≥60PPM | Transmission mode | Mechanical hand |
| Compatible material | Highland barley paper, fast bus paper, glutinous rice paper, RET
protective stickers, etc | Maximum impact speed | 99.99% |
| Work method | Stepper motor + pneumatic | Machine Dimensions | 1275*860*1524MM |
| structural material | aluminium alloy | Machine Weight | 150KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Cylindrical cell sticker |
Appearance structure
Debugging project
- Wear highland barley paper steps
- Adjust the press cutter
- Adjustable center position
- Loading step demonstration
- On-line debugging
- Replace stamping tool debugging
Device action flow description
Manually load the battery into the hopper - the wave wheel rotates
out of the battery - the belt moves the battery - the cylinder
launches the battery
team - the battery positioning and pressing - the stepping battery
drives the whole roll of highland barley paper to move - the
cylinder paste
highland barley paper - waste recycling - the finished battery to
the feeding tank - the human tooling box
(Operating parameters can be freely set according to actual
requirements)
Function Introduction
1.Hd touch screen
7 inch HD touch screen, real-time display of machine running
status. With fault alarm device, quickly determine the fault point,
after adjustment can continue production.
2.High speed steel cutter
The stamping die is non-adhesive and firmly pasted. The paste
position is consistent and does not affect the subsequent welding
procedure. Paste 4 cells at one time, high production efficiency
3.Large hopper
Large feeding hopper, slope type hopper, suitable for the whole box
feeding, feeding convenient. One-time 300PCS18650 battery cell.
