Battery Pack Universal Sticker Machine 18650/21700 Positive Sticker
60PPM Efficiency
Equipment introduction
● This paper paste machine is controlled by PLC stepper motor and
cylinder to complete the function of 18650/21700/21650 finished
core positive electrode paste highland barley insulation paper.
● The number of finished cylindrical cells can be completed about
4000 units per hour.
● 7 inch HD touch screen is used to monitor the machine running
status in real time.
● The cylinder is used to drive the cutting knife for stamping, and
4 electric cells are stamped at one time. The slice is made of
high-speed steel material, which has high wear resistance, good
quality and high production efficiency.
● Sticker, stamping stable, patch position consistency is high, low
defect rate.
● Fault information reminder function, fault sound and light alarm,
can quickly diagnose faults.
● With the function of clearing the end material, you can empty the
end material with one key.
● Compatible materials: highland barley paper, fast bus paper,
glutinous rice paper, RET protective stickers, etc.
● The mechanical structure design is simple and elegant, and the
system performance is stable.
Technical specification
| Production efficiency | 60-70PPM | Air source specification | 1/CFM |
| Applicable battery specifications | 18650/21700/21650 | Pass rate | ≥95% |
| Sticker efficiency | ≥60PPM | Transmission mode | Mechanical hand |
| Compatible material | Highland barley paper, fast bus paper, glutinous rice paper, RET
protective stickers, etc | Maximum impact speed | 99.99% |
| Work method | Stepper motor + pneumatic | Machine Dimensions | 1275*860*1524MM |
| structural material | aluminium alloy | Machine Weight | 150KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Cylindrical cell sticker |
Function Introduction
1. High speed steel cutter
The stamping die is non-adhesive and firmly pasted. The paste
position is consistent and does not affect the subsequent welding
procedure. Paste 4 cells at one time, high production efficiency
2. Hd touch screen
7 inch HD touch screen, real-time display of machine running
status. With fault alarm device, quickly determine the fault point,
after adjustment can continue production.
3. Induction device
Automatically sensing the location of the battery cell, such as the
detection of the battery cell does not reach or other conditions,
the equipment automatically alarms and stops running.Manual adjustment can continue production.
Device action flow description
Manually load the battery into the hopper -- the wave wheel rotates
out of the battery -- the belt moves the battery -- the cylinder
pushes out the
battery team -- the battery positioning and pressing -- the
stepping battery drives the whole roll of highland barley paper to
move -- the cylinder
paste highland barley paper -- the waste recycling -- the finished
battery to the feeding tank -- the operating parameters of the
human tool box can
be freely set according to the actual requirements of customers
Matters needing attention
- Wear highland barley paper steps
- Adjust the press cutter
- Adjustable center position
- Loading step demonstration
- On-line debugging
- Replace stamping tool debugging
Service process
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
FAQ
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery type?
2) Which battery type do you want to be compatible with?
3) Paste materials.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
