18650 Manual Spot Welding Packing Equipment Spot Welding Machine
For Lithium Ion Battery Auto Spot Welder
Equipment introduction
● The welding power control adopts a switch switching method,
enabling miniaturized, efficient, and high-output welding.
● The welding current rises quickly, making it most suitable for
ultra-precision welding.
● There are three types of control: ①constant current control,
②constant voltage control, and ③a combination of constant current
and constant voltage control.
● The energy stored in the capacitor is utilized for welding,
suitable for conditions with low power.
● Real-time dynamic detection of current, voltage, power, and
resistance waveforms.
● The automatic welding current monitoring function effectively
monitors the welding output current, and when the welding current
exceeds the alarm value, welding will be promptly supplemented.
● Controlled by precision microcomputer technology, it can save
multiple programs and change or call them at any time.
● With a proprietary OUTPUT ENERGY optimization algorithm, the
output voltage and current conversion are reasonable, resulting in
strong welding capability, firm welding joints, no need for
re-welding, small sparks, and good welding quality.
● The industrial circuit design ensures a safe and reliable
circuit.
Application scope of the product
Power lithium-ion battery modules, 3C lithium-ion battery packs,
nickel-metal hydride battery packs, hardware small parts,
electronic and
electrical components, wire harness terminals, stainless steel
parts, metal jewelry, copper products, aluminum products, etc. At
the same
time, they are also suitable for product maintenance proofing and
other work.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
Function Introduction
1. Cylinder drive
The air source interface is connected to the pressure regulator to
adjust the air source pressure and filter the water. The gas is
sent to the solenoid valve, which controls the gas drive cylinder
and drives the welding head.
2.Pneumatic precision welding head
Horizontal welding structure, double linear guide design, left and
right pressure can be adjusted separately. Built-in pressure
sensor, precise control to apply stable pressure.
3. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent
the damage caused to the desktop during welding. At the same time,
it can increase the fluency of welding and increase the welding
efficiency.
FAQ
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For
the installation of some widgets, we will send out detailed
training videos and user manuals randomly. 95% of customers can
teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as
possible. Do not try to repair the machine by yourself or others.
We will respond as soon as possible within 24 hours to solve your
problem.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can
provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order
of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on
each unit. After all the tests are passed, our QC will test the
welding performance.
Service process
After sale:
1. Confirm whether customers need on-site service or video
communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication
will be adopted to solve the problem first. Door-to-door service
can be provided if there is no solution.
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical
specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the
best quality service throughout the process!!!
